Professional Poly 8 ft. x 300 ft. BYO Deer Fence kit

from $2,849.00

Our flagship Professional System 8 ft. x 300 ft. BYO (Build Your Own) poly deer fence kit is a permanent fence that can be installed on almost any terrain and for a variety of applications. It is easy to customize by adding chew guard fence, end, corner and gate kits. Our installation recommendations allow for 300’ of fence to cover a 270—275 linear foot enclosure. Additional line posts may be required depending on your fence layout and terrain. We recommend post spacing for poly fence + flat terrain of 10 ft.—14 ft. and poly fence + hilly terrain of 10 ft. or less.

USAGE: Our Professional System polypropylene fence is a permanent fence that can be installed on almost any terrain. It can serve as a deer fence, dog fence, or garden fence. Add 3-ft. high chew guard fencing along the bottom for added protection.

FEATURES:

  • Reverse Sleeve Installation: Our exclusive reverse sleeve method makes installing posts easy. The reverse sleeve is a hollow, heavy gauge, galvanized metal pipe 5-ft or 6-ft in length that penetrates the ground with relative ease. A hand held post driver or an automatic gas powered driver is used to drive the sleeve about 3 feet into the ground. Once the reverse sleeve is in the ground, a bottom brace band is fastened to the reverse sleeve at ground level. A black deer fence post is then slid on top of the reverse sleeve and held in place by the brace band. The posts maintain a consistent height along the fence line.

  • 3 Cable Support System: Our 3-horiztontal cable support system consists of a top, middle and bottom cable. The cables stretches the fence vertically while also supporting it horizontally. The cables keeps the fence taught and prevents bending and sagging—providing a clean, formal appearance.

  • Virtual Invisible: From distances as close as 15 ft., the fence and posts fade into the shadows of plants and landscaping—making it nearly invisible.

    KIT INCLUDES:

  • 3 - Trident Maximum Duty Poly Deer Fence: 950 lbs. break strength (8 ft. x 100 ft. roll)

  • 21- Line Post Kits: 17 gauge x 1-5/8” posts with 6 foot reverse sleeve and hardware for 3 cable support system

  • 1- Top, Middle, and Bottom Cable: 8 gauge tension cable, 1,000 ft.

  • 9- Large gripples

  • 10- Bolt clamp for cable connection

  • 2- Cable Ties: heavy duty 11-inch UV stabilized, 100 ct.

  • 30- Ground Stakes: 18” rebar

  • 1- Hog Ring Gun: GLFast™ G7UTO Hog Ring Plier

  • 1- Hog Ring Clips: C-Ring, 11/16" Hog Rings (2,500 per box)

This item may require freight delivery.

Chew Guard Fence:
Professional Corner Kit:
Professional End Kit:
Professional Access Gate:

Our flagship Professional System 8 ft. x 300 ft. BYO (Build Your Own) poly deer fence kit is a permanent fence that can be installed on almost any terrain and for a variety of applications. It is easy to customize by adding chew guard fence, end, corner and gate kits. Our installation recommendations allow for 300’ of fence to cover a 270—275 linear foot enclosure. Additional line posts may be required depending on your fence layout and terrain. We recommend post spacing for poly fence + flat terrain of 10 ft.—14 ft. and poly fence + hilly terrain of 10 ft. or less.

USAGE: Our Professional System polypropylene fence is a permanent fence that can be installed on almost any terrain. It can serve as a deer fence, dog fence, or garden fence. Add 3-ft. high chew guard fencing along the bottom for added protection.

FEATURES:

  • Reverse Sleeve Installation: Our exclusive reverse sleeve method makes installing posts easy. The reverse sleeve is a hollow, heavy gauge, galvanized metal pipe 5-ft or 6-ft in length that penetrates the ground with relative ease. A hand held post driver or an automatic gas powered driver is used to drive the sleeve about 3 feet into the ground. Once the reverse sleeve is in the ground, a bottom brace band is fastened to the reverse sleeve at ground level. A black deer fence post is then slid on top of the reverse sleeve and held in place by the brace band. The posts maintain a consistent height along the fence line.

  • 3 Cable Support System: Our 3-horiztontal cable support system consists of a top, middle and bottom cable. The cables stretches the fence vertically while also supporting it horizontally. The cables keeps the fence taught and prevents bending and sagging—providing a clean, formal appearance.

  • Virtual Invisible: From distances as close as 15 ft., the fence and posts fade into the shadows of plants and landscaping—making it nearly invisible.

    KIT INCLUDES:

  • 3 - Trident Maximum Duty Poly Deer Fence: 950 lbs. break strength (8 ft. x 100 ft. roll)

  • 21- Line Post Kits: 17 gauge x 1-5/8” posts with 6 foot reverse sleeve and hardware for 3 cable support system

  • 1- Top, Middle, and Bottom Cable: 8 gauge tension cable, 1,000 ft.

  • 9- Large gripples

  • 10- Bolt clamp for cable connection

  • 2- Cable Ties: heavy duty 11-inch UV stabilized, 100 ct.

  • 30- Ground Stakes: 18” rebar

  • 1- Hog Ring Gun: GLFast™ G7UTO Hog Ring Plier

  • 1- Hog Ring Clips: C-Ring, 11/16" Hog Rings (2,500 per box)

This item may require freight delivery.

8-ft Line Post Kit
8-ft Line Post Kit
$72.00
8-ft Line Post Kit-2-pack
8-ft Line Post Kit-2-pack
$138.00
8-ft Line Post Kit-4-pack
8-ft Line Post Kit-4-pack
$270.00
8-ft Line Post Kit-7-pack
8-ft Line Post Kit-7-pack
$476.00
 

What’s included in options:

  • 3-rolls 19 gauge poly coated welded wire, 1-inch x 1-inch mesh design: 3-ft. x 100-ft

  • Professional System
    2-gate posts:     1 5/8 inch, 15 gauge
    2-Reverse ground sleeves: 6-ft. ss20
    2-braceband with eye bolt: 1 3/8-inch
    2- Collar with eye bolt: 1 5/8-inch
    2-brace band with hardware: 1-5/8-inch
    4-brace cups: 1 3/8-inch
    Black pipe gate frame and horizontal supports: 1 3/8 inch, 17 gauge
    Top spreader brace bar with 2 corner elbows: 1 5/8 inch
    4-corner elbows: 1 3/8 inch metal
    2-end rail clamps: 1 3/8 inch
    2-male hinges: 1 5/8 inch
    2-female hinges: 1 3/8 inch
    2-fork latches
    50-self-locking ties: 8 inch
    100-self sealing screws
    8-carriage bolts
    2-tension cable kits

  • Professional System
    2-End posts: 1-5/8-inch x 15 gauge post, 8-ft.
    2-Brace pipe: 1-3/8-inch x 17 gauge post, two 6-ft. sections for a total length of 12-ft.
    2-Reverse Ground Sleeve: 6-ft. ss20
    2- Post cap: 1-5/8-inch metal
    2- Collar with eye bolt:1 5/8-inch
    2- Brace bands with eye bolts: 1 3/8-inch
    4-Brace cups: 1 3/8-inch with hardware
    2-Brace bands: 1 5/8-inch with hardware

  • Professional System
    2-End posts: 1-5/8-inch x 15 gauge post, 8-ft.
    4-Brace pipe: 1-3/8-inch x 17 gauge post, two 6-ft. sections for a total length of 12-ft.
    2-Reverse Ground Sleeve: 6-ft. ss20 2- Post cap: 1-5/8-inch metal
    2- Collar with eye bolt: 1 5/8-inch
    2- Brace bands with eye bolts: 1 3/8-inch
    8-Brace cups: 1 3/8-inch with hardware
    4-Brace bands: 1 5/8-inch with hardware

Add additional line post kits

Additional line posts kits may be needed, depending on your terrain and layout.

8-ft Line Post Kit 8-ft Line Post Kit
Quick View
8-ft Line Post Kit
$72.00

8 ft. line post kit with hardware for a 3-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

  • 1-Line post: 1-5/8 x 17 gauge post, 8-ft.

  • 1-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 6-ft. A standard post driver* is used for installation.

  • 1-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. Bottom metal cable is threaded through eye bolt at ground level.

  • 1-Brace Band with eye bolt: 1-5/8 inch brace band with eye bolt is installed on post and middle support cable is run through hole in eye bolt.

  • 1- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

10 foot Driveway Gate 10 foot Driveway Gate 10 foot Driveway Gate 10 foot Driveway Gate 10 foot Driveway Gate 10 foot Driveway Gate
Quick View
10 foot Driveway Gate
from $419.00

Driveway gate kit includes:

  • 1 3/8 inch black pipe gate frame (includes all necessary hardware and all horizontal and vertical pipes to complete gate)

  • 4-metal gate corners

  • 2– 2.5 inch black metal gate posts with caps

  • 2–5 foot ss20 reverse sleeves (fits inside gate post)

  • 2–9 foot black metal brace pipe

  • 4 brace cups

  • 4 brace bands

  • 2 hinges

  • 2 latches

  • 2 leveling cables with turn buckles and gripples

  • 6 brace bands with eye-bolts

  • 50 self-locking ties