7-ft End Kit System
7-ft End Kit System
7 ft. end kit system with post, bracing and hardware for a 3-cable support system. This kit includes everything you need for ending your fence at it’s termination or start point.
All of our end post kit systems include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every end post, and the lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.
USAGE: Post kit system with single brace pipe for the start or end of a fence line.
WORKS WITH: All of our 7-ft. fence kits
KIT INCLUDES:
1- End/corner Post Kit: 7-ft. 15 gauge post, 6-ft. reverse sleeve, post cap and hardware for 3-cable support system.
1- Brace Pipe: 1-3/8” pipe, one in a 5-ft. section and one in a 6-ft. section for a total length of 11-ft.
2-Brace Cups: Secure brace pipe to post kit
1- Brace Bands: Fasten brace cup to post kit
End + Corner Post Spacing Recommendations
For 7 ft. high posts with 11 ft. brace pipe, the suggested spacing between end, corner, and gate braced posts and the next line post is 9 ft. However, the space can vary from 6 ft. to 10.5 ft. as needed.
If the distance between the braced post and next line post needs to be less than 9 ft., the brace pipe can be cut down to the necessary length.
If the distance between the braced post and next line post needs to be more than 9 ft., slide the brace band down the braced post. The brace pipe should be installed no lower than half way down the braced post.
