3-ft Line Post Kit (7-pack)

$319.00

3 ft. line post kit with hardware for a 2-horizontal cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

7-Line post: 1-5/8 x 17 gauge post, 3-ft.
7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 3-ft. A standard post driver is used for installation.*
7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.
7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

Quantity:

3 ft. line post kit with hardware for a 2-horizontal cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

7-Line post: 1-5/8 x 17 gauge post, 3-ft.
7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 3-ft. A standard post driver is used for installation.*
7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.
7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

Our exclusive reverse sleeve method is an easy to use system for DIY homeowners and contractors

Line post should be spaced 8 ft. to 14 ft. apart depending on the type of fence and terrain.

End, corner and gate posts require bracing. Post spacing may need to be closer than line post spacing.