5 ft. x 100 ft., Maximum Duty Deer Poly Fence

5 ft. line post kit with hardware for a 2-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 5-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 5-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

5 ft. end kit system with post, bracing and hardware for a 2-cable support system. This kit includes everything you need for ending your fence at it’s termination or start point.

All of our end post kit systems include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every end post, and the lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.

USAGE: Post kit system with single brace pipe for the start or end of a fence line.

WORKS WITH: All of our 5-ft. fence kits

KIT INCLUDES:

• 1- End/corner Post Kit: 5-ft. 17 gauge post, 5-ft. reverse sleeve, post cap and hardware for 2-cable support system.

• 1- Brace Pipe: 1-3/8” pipe, 8-ft.

• 2-Brace Cups: Secure brace pipe to post kit

• 1- Brace Bands: Fasten brace cup to post kit

45 ft. corner kit system with hardware for a 2-cable support system. This kit includes everything you need for a corner or turn in your fence line.

All of our corner kit systems include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every corner post, and the lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.

USAGE: Corners and turns up to 90 degrees in a 5-ft. high fence line

WORKS WITH: All of our 5-ft. fence kits

KIT INCLUDES:

• 1- End/corner Post Kit: 5-ft. 17 gauge post, 5-ft. reverse sleeve, post cap and hardware for 2-cable support system.

• 2- Brace Pipe: 1-3/8” pipe, 8 ft.

• 4-Brace Cups: Secure brace pipe to post kit

• 2- Brace Bands: Fasten brace cup to post kit

4 ft. line post kit with hardware for a 2-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 4-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 5-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

4 ft. end kit system with post, bracing and hardware for a 2-cable support system. This kit includes everything you need for ending your fence at it’s termination or start point.

All of our end post kit systems include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every end post, and the lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.

USAGE: Post kit system with single brace pipe for the start or end of a fence line.

WORKS WITH: All of our 4-ft. fence kits

KIT INCLUDES:

• 1- End/corner Post Kit: 4-ft. 17 gauge post, 5-ft. reverse sleeve, post cap and hardware for 2-cable support system.

• 1- Brace Pipe: 1-3/8” pipe, 8-ft.

• 2-Brace Cups: Secure brace pipe to post kit

• 1- Brace Bands: Fasten brace cup to post kit

4 ft. corner kit system with hardware for a 2-cable support system. This kit includes everything you need for a corner or turn in your fence line.

All of our corner kit systems include a superior bracing system, exclusive by the Benner Deer Fence Co. Each brace pipe is secured to the top of every corner post, and the lower end is fastened to the bottom of the next line post. This prevents movement of the braced post and lengthens the life of the fence system. The immovable post also provides a great termination point for cables and fence because the post is secure and will not shift when tension is applied.

USAGE: Corners and turns up to 90 degrees in a 4-ft. high fence line

WORKS WITH: All of our 4-ft. fence kits

KIT INCLUDES:

• 1- End/corner Post Kit: 4-ft. 17 gauge post, 5-ft. reverse sleeve, post cap and hardware for 2-cable support system.

• 2- Brace Pipe: 1-3/8” pipe, 8 ft.

• 4-Brace Cups: Secure brace pipe to post kit

• 2- Brace Bands: Fasten brace cup to post kit

3 ft. line post kit with hardware for a 2-horizontal cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 3-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 3-ft. A standard post driver is used for installation.*

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.