2 ft. x 100 ft. 14-gauge Welded Wire Deer Fence, 1.5-inch x 1.5-inch

8 ft. line post kit with hardware for a 3-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 8-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 6-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Collar with eye bolt: Collar is installed on post and middle support cable is run through hole in eye bolt.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

7 ft. line post kit with hardware for a 3-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 7-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 6-ft. A standard post driver is used for installation. *

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom metal cable is threaded through eye bolt at ground level.

• 7- Collar with eye bolt: Collar is installed on post and middle support cable is run through hole in eye bolt.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

6 ft. line post kit with hardware for a 2-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 6-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 5-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

5 ft. line post kit with hardware for a 2-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 5-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 5-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

4 ft. line post kit with hardware for a 2-cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 4-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 5-ft. A standard post driver* is used for installation.

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.

3 ft. line post kit with hardware for a 2-horizontal cable support system.

USAGE: Use as line posts spaced between 8-ft. and 14 ft. Metal fence and hilly terrain require closer post spacing.

Kit includes:

• 7-Line post: 1-5/8 x 17 gauge post, 3-ft.

• 7-Reverse Sleeve: ss20 galvanized metal reverse ground sleeve used to support black metal deer fence post, 3-ft. A standard post driver is used for installation.*

• 7-Brace Band with eye bolt: 1-3/8 inch brace band is secured to reverse sleeve at ground level to lock post in place. A bottom cable is threaded through eye bolt at ground level.

• 7- Post cap: Post cap is installed on top of post. Top cable support is run through hole in post cap.

*Driving cap is not needed for installation.